INVERTO QUAD MONOBLOCK 4.3 is a monoblock converter with 4 outputs, which allows receiving a signal from 2 adjacent satellites, shifted by 4.3 degrees.
DESCRIPTION:
Converter is four outputs for two satellites.
Low phase noise, DVB-S2 (HDTV) compatible.
Low noise figure.
Low consumption.
High isolation between polarizations.
High oscillator stability.
Built-in DiSEqC key.
Input frequency for the lower range: 10.7~11.7 GHz.
Output frequency for the lower range: 950~1950 MHz.
Local oscillator for the lower range: 9.75 GHz.
Input frequency for the upper range: 11.7~12.75 GHz.
Output frequency for the upper range: 1100~2150 MHz.
Local oscillator for the upper range: 10.6 GHz.
Noise figure: 0.2 dB typical (0.7 dB Max.).
Phase noise (@ 10 kHz):- 90 dBc / Hz Max.
Gain: 55 dB Min.
Isolation between polarizations: 22 dB Min.
Output VSWR:2.5:1.
Consumption: 250 mA Max. @ 11~20V.
Operation at temperature:- 30 °C~+ 60 °C.
Output resistance: 75 Ω.
Output connector: F-Type (female).
Weight: 1.000 Kg.
Warranty: 2 years.
Rating:0out of 5 stars
5
0%
4
0%
3
0%
2
0%
1
0%
Converter with 4 output for 2 satellites at 4.3 degrees INVERTO QUAD MONOBLOCK 4.3
