Unicable converter E-TRONIX ETX-SCRQD

   E-TRONIX ETX-SCRQD is a converter manufactured by MTI. With this converter you can connect up to 4 satellite receivers via 1 coaxial cable. The converter has 1 unicable output, to which 4 receivers can be connected, and 1 normal output, which can be used both for easier initial antenna setup and for full reception of programs on any satellite receiver.

DESCRIPTION:

• Designed to work with OFF SET antennas.
• Professional converter with two outputs.
• One Unicable (SCR) output for 4 receivers.
• One normal setup output.
• Ability to work with 5 satellite receivers.
• Recommended for motorized and stationary antennas receiving very weak signals.
• Designed to receive SD, HD and 3D programs.
• Protective cap for the cable.
• Mounting: 40 mm holder.
• Big boost.
• Low phase noise.
• Very low noise figure.
• Very low consumption.
• Good insulation in terms of polarizations.
• High stability of loc. oscillator.

FEATURES:

INCOMING FREQUENCY:

• Lower band: 10.7~11.7 GHz.
• Upper band: 11.7~12.75 GHz.

OUTPUT FREQUENCY:

• 1st channel: 1210 MHz.
• 2nd channel: 1420 MHz.
• 3rd channel: 1680 MHz.
• 4th channel: 2040 MHz.

LOCAL OSCILLATOR:

• Lower band: 9.75 GHz.
• Upper band: 10.6 GHz.
• Noise figure: 0.1 dB typical.
• Lok. oscillator accuracy: +/- 1.0 MHz Max.
• Phase noise (@ 10 kHz): - 90 dBc / Hz Max.
• Gain: 60 dB Min.
• Isolation between polarizations: 25 dB Min.

POLARIZATION SWITCHING:

• Vertical polarization: 11.5~14.0 V.
• Horizontal polarization: 16.0~19.0 V.
• Output VSWR: 2.0 : 1.
• Consumption: 320 mA Max. @ 11~20V.
• Operation at temperature: - 30 °C ~+ 60 °C.
• Output resistance: 75 Ohms.
• Connector type: F-type (female).
• Weight: 0.500 Kg.
• Warranty: 2 years.